Saturday, September 25, 2010

Sewing Vintage Styles: Vogue Vintage Patterns, 8686 & 8687

Vogue 8687
Vogue 8687

Vintage style sewing patterns Vogue 8686 and Vogue 8687 offer a great way to get a retro look with a more modern fit. Fall is a good time to start a sewing project and these two patterns would sew up well in light weight wools or wool blends.

The Vogue 8687 ensemble above has a 1950's coat style that would be easy to sew. It could be made to be worn alone. This coat would be perfect in many weights of fabric, from brocade for evening to gabardine, plaid or canvas for outer wear. The body of the coat is cut in one with the sleeves, so it is a great project for the sewist who might be afraid of a difficult and complicated coat pattern.

The sleeveless sheath included in this pattern could also be worn alone. 1950's styles are often seen in silk florals, brocades, solid crepes or linens (great for spring and summer). For a more modern twist why not try a light wool men's wear gabardine.

Of course, you can go with the suggested ensemble and create the set. I have in my collection a gorgeous dress and coat set in black wool crepe lined in silk with a black and white abstract design. This pattern is a super way to showcase a dramatic silk print. Another alternative is to make the sheath bodice in the same silk to match. As a lining, the print will come as a suprise when you take off the coat with a flourish!

Vogue 8686
Vogue 8686

Vogue 8686 has a mid-1930's style with a slender skirt and wider upper body typical of the period. When looking for the right fabric, try to find one with enough drape to reveal the body. If the fabric has too much shape, this dress could look bulky and stiff. I think that a wool crepe would be nice and have the right vintage look.

The bodice pattern has small bust gathers at the waistline, typical of the early to mid-1930's. It may not have enough shape for a larger bustline. Sizes bigger than a B cup may want to make a muslin fit sample and add shape to the midriff with a waistline bust dart to decrease the bodice fullness.

This dress would be a knock-out, especially of you can find a great bakelite buckle to go with it!

Thursday, September 2, 2010

SEWING VINTAGE: 'S' Curve Darts & Flat Lining as Facing


Sewing vintage patterns from the 1940's, 1950's and early 1960's is fun, but getting the right look often requires sewing methods we don't see today. Learning how to sew the styles you like will make it easier to get the look you want. One method is flat lining, and here I want to show a fast and easy way to sew. Our modern fusible interfacings have made traditional flat lining unnecessary. It can have advantages though, and I thought I would share those with you.

Another out dated construction technique is the "S" shaped dart. A straight dart creates at flat curve. In some cases, that is what we want. However, if you are trying to get an hour glass fit to your bodice, than you might want to consider an "S" shaped dart. Glove fitting dresses like those produced by Lanz in the 1950's reveal this dart shape: it hugs the rib cage and curves around the bustline for a smooth body fit.


This light-weight summer cotton dress would wrinkle, and perhaps pull at the seams without this inner construction method. A cool cotton faces the fashion fabric, creating a stronger bodice to the flowing skirt.

FLAT LINING as FACING

Briefly, this method uses a cotton lining that is cut at the same time as the fashion fabric. This is sewn around the neckline and if it is sleeveless, the armholes. This bodice is then turned to the right side. At this point the darts can be sewn and the side seams completed.

This is a fast method that eliminates the need for facing in most cases. The time spent cutting out facing and finishing those edges will be saved.

Open side seams allow for further fitting and adjustments in the future. The top edge at the armhole can be hand sewn to reinforce that upper edge. This method works for both sleeveless styles and bodices with sleeves.


'S' CURVE DART

The dart will have an smooth seam line up the rib cage, then curve around the bottom of the bust, tapering to a fine line at the end. An 'S' curved bodice dart will create a smooth fitting bodice. It has to be fitted on the body, and should be developed in the pattern stage. However, it can be pinned into place after the bodice is flat lined.

POINT OF BUST

This is the bustline center. Do not end darts here because that will make pointed darts. Imagine a Quarter sized circle around the point of bust (it's OK to draw this onto your lining). End the dart point at that circle perimeter line.

FITTING

1-BASTE the side darts, using your machine's largest stitch length

2-BASTE the side seams together

3-TRY ON the bodice

4-PIN the back seam together down the seam line

5-PIN in the front bodice darts, shaping them to the rib cage and around the bustline, creating an 'S' curve dart.

6-MARKING: after fitting, remove the bodice for marking. You may mark the dart position on the lining with chalk or pencil before you sew these darts. The two darts should be 'balanced' visually but they may not be exactly the same. As long as the bodice side seams are in the correct location (down your body sides), then they should be fine. No one is exactly the same on both sides of their body, so your darts may reflect that as well.

7-CLIPPING: some 'S' curve darts require clipping so that they can be pressed open. Trim away excess fabric to create a 1/2" seam allowance up the dart. If you have a serger, you can finish these cut seams to prevent unraveling (or zig-zag over the edges).

8-PRESSING: these darts can be pressed open, or towards the front. On this bodice the seams were overlocked together and pressed towards center front. Often the fabric bulk requires that they are pressed open.


-----------------------------------------
HOW TO FLAT LINE as FACING:
STEP-BY-STEP


LINING and FASHION FABRIC

On your cutting surface, lay out the fashion fabric 'face down'. Over this, lay on the cotton lining. Smooth out bubbles and align the selvage edges. Pin on pattern (this method will need a pattern for each part, as it doesn't have a center fold). Cut out the pattern.

SEWING

1-Separate the lining and fashion fabrics. Sew the lining fabric shoulder seams and bodice fabric shoulder seams. Press those seams open.

2-On the work surface: lay out the fashion fabric bodice, face up. Over this, lay the lining bodice, face down. The two layers will now be facing each other. Pin together, matching the shoulder seams, then smooth the fabric flat so that all edges meet.

3-SEW around the neckline and armholes. Clip the seam allowances around these curves.

4-TURN the bodices to the right side so the good sides are now facing out, press flat. Match all edges and pin together so that the fabric doesn't shift apart.

5-OVERLOCK unfinished edges, with both layers together: side seams, waistlines and back seams. If you do not have a serger, trim these edges neatly then zig-zag overcast with a wide stitch.

6-FITTING: (see notes above)

7-DARTS: sew bodice darts (see "S" curve dart)

8-SIDE SEAM: this seam will be sewn, then opened flat. The top edge can be reinforced by hand stitching to keep it open. This type of seam will allow for alterations in fit.

9-NECKLINE and ARMHOLE edges can be edge stitched to create a crisp, flat edge.
The bodice is now ready for the skirt to be sewn on to it.

------------------------------------------

I hope you can try this flat lining technique with your next project. I think you will really like the results. If you have had your own experience flat lining, let us know how that worked out.

note: I used a display form for these photos who is sizes smaller than the dresses shown. You will notice the fit isn't correct, try to imagine it is.